4 Common Problems with Electrical Service Panels
Electrical service panel (or a breaker as it often called) is the most important part of the electrical system in your home. Electrical service panel is used to connect to the power cable from the utility companies and also provides electrical current to all the circuits in your home. Electrical service panel is the main line of defense against your home electrical problems.
Electrical service panel uses fuses to help protect against overheating, overloading and other electrical problems in your home. Fuses are designed to wear over time and is designed to automatically turn off if the load is too much for your home’s electrical system to handle. In theory, the electrical service panel is a very simple system. However, there are some things that can wrong with a main breaker in your home.
Caution Electric Cable Service
electric cable is the cable that runs from the power pole to your house. This cable company is strictly the domain of electricity and can not be touched by you or others. If you suspect a problem with an electrical cable service, please contact your utility company immediately.
Rust stains
A common problem with many electric service panel is due to moisture or water leaking into the box from the outside. For example, if you have a leaky roof, water may seep into the electrical service panel through the wall and into the fuse. You will usually see the damage due to moisture or rust stains rust evident on the inside or outside the electrical service panel door. If you see rust or discoloration of the milk, do not go near the place of the service panel. Instead, contact a licensed electrical builders soon to check the place you vote.
Knockouts or Pennies Behind Fuses
Another problem, common, and potentially very dangerous with the older type of service from the electrical panel use fuses twist on the old type of knockout that has been placed on the back of the fuse. Sometimes, people would put a penny or other metal objects in the back of the fuse and then screw the fuse back to the service panel. This prevents the fuse from tripping when the load current, or too much is passed through the system. Although it will keep or cut the fuse off the power, is also very dangerous because the heat is created in such a situation could cause an electrical fire.
Double dipping on Single Breaker
Sometimes, people will try to add new outlets and switches in the home without adding a new circuit breaker. Once this is completed, it is common practice, but unfortunately, for some to run new wires to the breaker and then put two wires into the fuse has a single vote. This is not only dangerous but also illegal. Almost all the towns and cities have rules and laws that prohibit the kind of double dipping into the single fuse. These types of problems have caused many house fires and also cause the rejection of home insurance claims adjuster who knows a lot of time on this issue.