5 Best Uses for a Time Delay Relay
A time delay relay is equipped with a type of shock absorber that does not allow full power will flow. Delayed Power and allowed to flow slowly within or outside the coil. Here are some of the time delay relay, which is used primarily in industrial environments.
1 – Timing Belt Conveyor
If the plant is equipped with a number of conveyor belts, the time delay relay will need to make them work better. As you know, the goods transported from one place to another on the conveyor belt in a factory, but the belt does not operate directly as soon as you have to press the start button. A time delay relay conveyor belt speed is reduced until the goods are carried by conveyor belt to get there first will come at the right point of time.
Also, the time delay relay, helping to launch a conveyor belt at a time in the opposite direction, but switch on the conveyor belt to date. This is done to the goods being transported by conveyor belt will not get piled up or stuck on the conveyor belt which is not active or moving slowly.
2 – Manipulation of Light
Some lights today use time delay relays to activate themselves and come back after some time. However, the two relay delay needed for the lights to do this, they must work together to provide a uniform frequency and timing lights to light the lamp removed.
3 – Automatic Engine Start-Up
Many buildings today are equipped with electrical generators start themselves automatically in an emergency, when the electricity cut off. Typically, the engine generator should have switched parts first, such as pre-lubrication oil pumps and fuel pumps. They need to stabilize before the motor generator is turned on. An electric generator use the time delay relay to ensure that the pump and the other is activated in the correct sequence before the motor is switched on automatically.
4 – Furnace Fan Control
Security procedures should be followed properly when lighting the stove. The fan in the furnace combustion chamber is required to operate for some time before the furnace goes on, this is done for the fan blows away any steam or steam can cause an explosion in the furnace. Time delay relay, fan control and allow for ventilation furnace combustion chamber for a period of time.
5 – Motor Control Slow Start
A time delay relay can be used to slowly start the motor running on electricity. This allows the motor to turn himself slowly with power than to give full force at once. When a certain time has elapsed, the time delay relay allows full power to flow through the motor and make it work better.