How to Build a Garage Storage Loft
A garage storage loft can be a practical addition to your garage, because it will help you keep things you do not need or you can not have in your home. Building a garage attic store can be done easily and quickly, to meet your storage needs with easy and comfortable. You can use the extra space for each type of equipment, decorations or off season clothes and other things that you do not use on a daily basis. The following is a brief guide on how to build a garage storage loft in a few easy steps.
Tools and Materials You’ll Need:
* Wooden board
* Wood post
* Post an anchor – they should be comparable to the size of the board and posting
* Lag bolts
* Cross beam and nail hangers
* Lumber screw
* Plywood boards
* Drill, screwdriver, bit
Step 1 – Preparation
The first thing you should do is to buy tools and materials you need. The size and amount of wood and wood you will need to depend on the size of your garage and attic of the size you want to build. You should check local building codes to ensure that you do not endanger the integrity of the building. Determining the size is an important part of the job. You need to allow posting to a floor support, ensuring that there is enough room for cars in the garage. If the garage has high ceilings you should take advantage of it, so enough room under the attic of your garage is being built.
Step 2 – The Loft Plan
Use the posts to plan a garage attic, add support, if needed, for greater loft or greater. Leave enough space for a number of cross-level and board 15in each side of the 4 apartments. This simple guide will help you decide on the size timber you will use. If you visit a hardware store or timber, you can have the board cut in the size you need. If you are familiar with the task, you can always cut their own, using a chainsaw.
Step 3 – Secure House
The next step requires you to secure the board to the wall of the garage, using lag bolts. Turn the 3-inch screws into studs, make sure you install the boards in each of the stud wall. Once you do, you need to attach the anchor text, using a bit of wood. Screw the post, securing it into position. So you must attach a ledger board, sleeping with them to the wall board and the support post on the floor.
Step 4 – Install joist
The next thing you need to do is nail hangers for their positions on both sides of the frame, shifting figures in the suspension. The floor must be firm and support the strong to resist and to support the garage attic.
Step 5 – Final Touch
When you are finished with the post, you have to take the plywood and put it on the amount of loft you have built. Use deck screws to secure the plywood floor into place safely and securely.