Weatherproofing a Fiberglass Garage Door
Fiberglass garage doors offer better durability than other garage door materials such as wood. However, the door is not possible to protect homes from extreme cold or heat, if not weatherproofed. Here are some ideas that leaky roof that can help you save energy costs and treatment.
Painting
Painting provides the first line of defense against damage. This not only provides a protective layer, as well as the aesthetic impact. Before painting, be sure to sand the surface to make them coarse. This allows easy coat to adhere. Use a primer that also acts as a sealer prior to paint finishing cut. This provides better water protection and prolong the life of the paint and the door itself. Make sure you use paint designed for exterior use.
Coloration
Such as painting, staining also provides a certain level of protection against the effects of storms, drizzle, or rain. However, this method is best used for fiberglass garage doors are designed to mimic the texture of wood. As most of the fiberglass doors are designed with this method, staining may be a better choice than the defense of his original design drawings and door colors.
To stain the door, do sand the surface first to make staining much easier. stains evenly to avoid producing tones evenly cut. In the first layer of thin spots implement. Let dry, sand again to make it rough, and implementing a thick coat finishing. Wait until dry. It might only take a few minutes depending on the weather and the type of stain used.
Provide insulation
Perhaps the best way to weather all the doors to provide insulation. The process of isolation to prevent too much heat from entering the room during the summer. During winter, it will also protect the house from the outside cold. This in turn saves a lot of money.
In addition to insulation against extreme temperatures, and also insulates against noise. A garage which can interfere with noisy neighbors. By providing insulation, you avoid problems with neighbors. Voice will also be isolated from the outside, thus providing a quiet room to work in a certain period of time.
There are ready isolation kit is available at home improvement centers. Kit consists of insulating foam pads are usually pre-cut to fit most garage door panel. This foam should dilem and on the side panel. The installation kit is made easy. Just follow the instructions provided in the kit.
Repair Damage
Damage to the fiberglass door can be dangerous to the protection provided by the gate layer and isolation. Therefore, it is wise to check every once in a while to check the damage. Scratches can be repaired easily by painting or staining again. However, puncture or crack must be patched with fiberglass cloth and resin. Patches can be purchased as a complete kit. Make sure you follow directions carefully when the factory because the product patching fiberglass patch can be dangerous if not used correctly.